CHAIN PULLEY BLOCK
ELECTRIC WIRE ROPE HOIST
OVERHEAD TRAVELLING CRANE (EOT, HOT, S/G,       D/G)
JIB CRANE
GOODS LIFT / CAGE HOIST
GOLIATH CRANE / GANTRY CRANE
 
> Weigh Bridge
> Electronic Weighing Scale
www.endeavourweigh.com

 

Overhead Travelling Crane

 
ovehead_travelling_crane
  • Single Girder, Double Girder, Electric Operated and Hand Operated type overhead traveling cranes.
  • Design and Manufactured in compliance to IS 807 & IS 3177 for different applications to appropriate class & duty. Hoist / Crab machinery designed in compliance to IS 3938.
  • The Bridge Girders are plate welded box type designed to sustain all stresses arising due to vertical and lateral forces with impact.
  • The End Carriages are fabricated from rolled steel section with suitable diaphragms & stiffeners to give strong construction. Rubber buffers are provided on both sides of end carriages to absorb jerks.
  • The Gear Boxes are made of accurate hob cut helical / spur gears & pinions having hardness 250 to 350 BHN made from carbon alloy steel. All gears & pinions running on antifriction type ball / roller bearings in totally enclosed oil bath giving constant splash lubrication.
 
  • Twin drive arrangement will be provided for Long Travel motion which contains motors, gear boxes, brakes etc. coupled together.
  • The crane duty Electric Motors as per IS 325 are suitable for frequent starting, reversing & braking. Motors are foot / flange mounted TEFC / TESC, Sq. cage / Slip ring induction type for hoisting, C.T. and L.T. motion.
  • Fail to safe Electromagnetic / Electro hydraulic thruster type brakes are provided for hoisting, C.T. & L.T. motion.
  • Safety Limit Switches for stoppers are provided to prevent over hoisting and traveling.
  • End Stoppers are provided on either side of the bridge to limit the cross travel motion of the hoist / crab.
  • M.S. chequered plate / anti skid plate platform is provided for full length on one side of the bridge girder.
  • The Control Panel consists of contactors, overload relay, fuses, transformers etc.
  • The crane is suitable to operate on power supply of 415 V, 50 Hz, 3 Phase, A.C.
  • The operation of the crane is controlled from suspended pendent push button station / remote control.
  • The structural parts of the cranes are thoroughly cleaned and are applied with one coat of red oxide and two coats of enamel paints before dispatch.    

double-grider-eot-crane

 
 

Home            Company Profile            Contact Us            Inquiry

 

Designed & Hosted by:GID Promoted by:MID